Skip to main content

Firmware Update

[DDJ-1000SRT] Firmware Update Manual

DDJ-1000SRT Mixer

A. Checking the current firmware version of DDJ-1000SRT

  1. Connect your DDJ-1000SRT to your computer using a USB cable.

  2. Launch the Driver Version Display Utility or Settings Utility.

    ・ For Mac:
    1. In Finder, open the [Applications] folder. 2. Click [Pioneer] > [DDJ-1000SRT] > [DDJ-1000SRT Driver Version Display Utility].
    ・ For Windows 10:
    In the Windows [Start] menu, click [Pioneer] > [DDJ-1000SRT Settings Utility]
    ・ For Windows 8.1:
    In [Apps view], click [Pioneer] > [DDJ-1000SRT Settings Utility].
    ・ For Windows 7:
    In the Windows [Start] menu, click [All Programs] > [Pioneer] > [DDJ-1000SRT] > [DDJ-
    1000SRT Settings Utility].
  3. Check the Firmware Version in the Settings Utility.
    The firmware version is displayed in the [About] tab. (The figure below is a Mac version)
    Screenshot_2022-01-10_at_11.35.19.png

B. Checking the downloaded file.

  1. Unzip the downloaded file.

    ・ For Mac:
    Save the downloaded file [DDJ-1000SRT_vxxx_Mac.zip] to an arbitrary folder such as desk top and unzip it.
    The [DDJ-1000SRT_vxxx_MAC.dmg] file is generated when the file is unzipped and then double click it to mount.

    ・ For Windows:
    Save the downloaded file [DDJ-1000SRT_vxxx_Win.zip] to an arbitrary folder such as desk top and unzip it.

  2. Check the unzipped file.

    ・ For Mac:
    The [DDJ-1000SRT_vxxx_MAC] folder is generated when the file is extracted. Please ensure the following file is included in the folder. [DDJ-1000SRT_vxxx.app]

    ・ For Windows:
    The [DDJ-1000SRT_vxxx_WIN] folder is generated when the file is unzipped. Please ensure the following files are included in the folder.
    [DDJUpdate.exe]
    [DDJ-1000SRT_UP.upd]
    [pcupdate.dll]

    ✓ xxx is numerical characters of the new firmware version.
    ✓ Depending on your computer settings, the extension such as .exe or .app may not be displayed.

C. Preparing for the update on the DDJ-1000SRT

  1. Connect the DDJ-1000SRT to your computer.
    Connect your DDJ-1000SRT to your computer using a USB cable.
    (Connect the USB cable to the USB-A terminal of the DDJ-1000SRT.)

  2. Turn on the power of the DDJ-1000SRT.
    Press the power button on the rear panel of the DDJ-1000SRT to turn on the power.
    Screenshot_2022-01-10_at_11.39.11.png

D. Updating the firmware through your computer.

  1. Updating procedures.
    Before updating, close all the applications running on the computer.

    <STEP1> Open the updater program.

    ・For Mac: Double click [DDJ-1000SRT_vxxx.app].
    ・ For Windows: Double click [DDJUpdate.exe].

    <STEP2>  Select a language.
    Select a language you want to use and click “OK”.
    Screenshot_2022-01-10_at_11.44.26.png✓ Please refer to “Tips: When [Your DDJ-1000SRT is not recognized] is shown during updating the firmware” in a later section if the same message is popped up after clicking “OK”.

    <STEP3> Check the firmware version.

    Ensure that the version is x.xx. Click “Start”. (The figure below is an example.)
    Do not disconnect the power cable and the USB cable during the update.
    Please use an AC adaptor to power your laptop during update.
    Screenshot_2022-01-10_at_11.59.23.png

    <STEP4> During the update.
    Please wait until the progress bar reaches to the right end.
    Screenshot_2022-01-10_at_11.59.32.png

    While the update is in progress, the red at the top of the master level indicator flashes and the second and lower green, orange and red are lit in sequence.
    Screenshot_2022-01-10_at_12.01.37.png
    <STEP5> During the update.
    When all the LEDs of the master level indicator on DDJ-1000SRT are lit, the firmware update is complete. If the message below is displayed, click “OK”.

    <STEP6> Reboot the DDJ-1000SRT.Screenshot_2022-01-10_at_12.03.10.png

E. Checking the firmware version

Check the firmware version of the DDJ-1000SRT as described in “A. Checking the current firmware version of DDJ-1000SRT”. When you find the version you wanted, the firmware update is successfully complete.

Tips: When [Your DDJ-1000SRT is not recognized.] is shown during updating the firmware

When the following message appears after selecting a language, check the following tips.

Screenshot_2022-01-10_at_13.09.34.png

・ Is the USB cable connected to the USB-A terminal? If it is not connected, connect the cable to the USB-A port and start the updating steps from the beginning again.
・ When the above message appears even if the cable is connected to the USB-A terminal, please follow the steps below.

  1. Uninstall the driver software of the DDJ-1000SRT.
    How to uninstall the driver software:.

    ✓ For Mac users:
    Double click the driver software and then double click [DDJ-1000SRT Uninstaller.app].
    Follow the instructions on your computer after this.

    ✓ For Windows users:
    Click [Start] menu > [Control panel] > [Programs and Features].
    Then right-click [DDJ -1000SRT Driver]. Click [Uninstall] in the context menu.
    The latest driver software is available from the following link. pioneerdj.com/en/support/
  2. Update the firmware again from the beginning.

  3. After completing the firmware update, install the driver software again.
    Please see the Operating Instructions to learn how to install the driver software.

Tips: How to cope with abnormal termination:

If the following message appears during the update, turn off the power of the DDJ-1000SRT and then restart the update from “C. Preparing for the update on the DDJ-1000SRT” of the above updating procedures. When the update is abnormally terminated, the DDJ-1000SRT may launch in firmware update mode with the red at the top of the master level indicator flashing. In this case, please restart the update from ”D. Updating the firmware through your computer” of the above updating procedures.

Screenshot_2022-01-10_at_13.13.06.png

Tips: If you are still unable to update the firmware:

  1. Turn on the power while holding down [CENSOR] and [4 BEAT LOOP] on the left deck. |
    The red at the top of the master level indicator will start flashing and the DDJ-1000SRT will launch in firmware update mode.
  2. Restart the update from ”D. Updating the firmware through your computer” of the above updating procedure.

    [Reference information]

    This updater program has been verified to operate on the operating systems below
    Mac:
    macOS Mojave 10.14 / macOS High Sierra 10.13 / macOS Sierra 10.12

    Windows:
    Windows 10 / Windows 8.1 / Windows 7 Approximately 5 minutes is required for the update.

    The images shown in this Guide may not be the same as the current ones.

About Trademarks and Registered Trademarks
・ Pioneer DJ is a trademark of PIONEER CORPORATION, and is used under license.

・ Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
・ Mac, macOS and Finder are trademarks of Apple Inc., registered in the U.S. and other countries.
・ Other stated company names, product names, technology names, etc. are the trademarks or registered trademarks of their respective owners.

                                                                                                                                                          ©2019 Pioneer DJ Corporation. All rights reserved.

Pioneer DJ Corporation
6F, Yokohama i-Mark Place, 4-4-5 Minatomirai, Nishi-ku, Yokohama, Kanagawa 220-0012 Japan

Was this article helpful?