Connecting to a PC

*1 RCA audio cables are not supplied with the unit.
*2 Adjust the volume of the device* connected to the [MASTER] output until you have a volume level you're happy with. *Speakers with built-in amplifiers, etc.
*3 The [MIC] input supports only unbalanced input.
*4 If you don't use a microphone, minimize the volume level using the [MIC LEVEL] knob.
*5 Be sure to use the supplied USB cable for constant high-level performance. If your PC has only a USB Type-C port, you'll need to use a USB Type-C male to USB-A female cable (sold separately). Be sure to launch djayPRO for Windows first, then connect the unit with your PC using the supplied USB cable.

_________________________________________________________________________________________________________

Prior to use (important)

・ Download djayPRO for Windows from the Microsoft Store. (paid feature) https://www.microsoft.com/en-us/p/djay-pro/9nblggh4vm4h?activetab=pivot:overviewtab
・ If you already have djayPRO for Windows installed, update it to the latest version.
・ If your PC has only a USB Type-C port, you'll need to use a USB Type-C male to USB-A female cable (sold separately).
・ Refer to the Hardware Diagram on the Pioneer DJ support page for functions you can control from the unit.

________________________________________________________________________________________
System requirements

Supported operating systems: Windows® 10 Version 1607 or later (32/64-bit)
USB port: Your PC must have a USB 2.0 port to connect with the unit.
Internet connection: You'll need an internet connection for downloading the software and streaming.

For information on the latest system requirements, compatibility and supported operating systems, visit the Microsoft Store.
https://www.microsoft.com/en-us/p/djay-pro/9nblggh4vm4h?activetab=pivot:overviewtab

________________________________________________________________________________________

Turn the power on.

First, turn on your PC. Then, turn on the power of all connected devices such as speakers with built-in amplifiers.
Be sure to launch djayPRO for Windows first, then connect the unit with your PC using the supplied USB cable.

________________________________________________________________________________________

Check the audio device settings

Follow the instructions below to confirm that the unit is recognized as an audio device.

1. Click [] on the top-left corner of the screen and click [Configure audio device].

2. On the Device screen, check that the settings are as follows.
If not, select the items as follows, and click [Apply].

________________________________________________________________________________________

About trademarks and registered trademarks
・ Pioneer DJ is a trademark of PIONEER CORPORATION and is used under license.
・ djay and its logo are trade names or registered trademarks of Algoriddim GmbH.
・ Microsoft and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.
Other trademarks and trade names are the property of their respective owners.
© 2019 Pioneer DJ Corporation