Connecting to a Mac
*1 RCA audio cables are not supplied with the unit.
*2 Adjust the volume of the device* connected to the [MASTER] output until you have a volume level you're happy with. *Speakers with built-in amplifiers, etc.
*3 The [MIC] input supports only unbalanced input.
*4 If you don't use a microphone, minimize the volume level using the [MIC LEVEL] knob.
*5 Be sure to use the supplied USB cable for constant high-level performance. If your Mac has only a USB Type-C port, you'll need to use a USB Type-C male to USB-A female cable (sold separately).
_________________________________________________________________________________________________________
Prior to use (important)
・ Download djayPRO for Mac from the App Store. (paid feature)
https://apps.apple.com/us/app/djay-pro-2/id1302002064?mt=12
・ If you already have djayPRO for Mac installed, update it to the latest version.
・ If your Mac has only a USB Type-C port, you'll need to use a USB Type-C male to USB-A female cable (sold separately).
・ Refer to the Hardware Diagram on the Pioneer DJ support page for functions you can control from the unit.
Precautions djayPRO for Mac is a DJ software made by Algoriddim GmbH. Refer to the Algoriddim website for the app. https://www.algoriddim.com/ The URL listed in this guide is as of June 2019 and are subject to change. |
System requirements
Supported operating systems: macOS Mojave 10.14, macOS High Sierra 10.13, macOS Sierra 10.12, OS X 10.11 (latest update)
USB port: Your Mac must have a USB 2.0 port to connect with the unit.
Internet connection: You'll need an internet connection for downloading the software and streaming.
For information on the latest system requirements, compatibility and supported operating systems, visit the App Store. https://apps.apple.com/us/app/djay-pro-2/id1302002064?mt=12
_________________________________________________________________________________________________________
Turn the power on.
First, turn on your Mac. Then, turn on the power of all connected devices such as speakers with built-in.
_________________________________________________________________________________________________________
Check the audio device settings
After launching djayPRO for Mac, follow the instructions below to confirm that the unit is recognized as an audio device.
-
Click [
] on the top-left corner of the screen and open [Audio Device Setting].
-
On the Devices screen, check that the settings are as follows.
_________________________________________________________________________________________________________
About trademarks and registered trademarks
・ Pioneer DJ is a trademark of PIONEER CORPORATION and is used under license.
・ djay and its logo are trade names or registered trademarks of Algoriddim GmbH.
・ Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other countries.
・ App Store is a service mark of Apple Inc.
Other trademarks and trade names are the property of their respective owners.
© 2019 Pioneer DJ Corporation