Skip to main content

djay

djay PRO for Mac - Audio Setup Guide [DDJ-400]

Connecting to a Mac

Screenshot_2022-01-04_at_14.03.37.png

*1 RCA audio cables are not supplied with the unit.
*2 Adjust the volume of the device* connected to the [MASTER] output until you have a volume level you're happy with. *Speakers with built-in amplifiers, etc.
*3 The [MIC] input supports only unbalanced input.
*4 If you don't use a microphone, minimize the volume level using the [MIC LEVEL] knob.
*5 Be sure to use the supplied USB cable for constant high-level performance. If your Mac has only a USB Type-C port, you'll need to use a USB Type-C male to USB-A female cable (sold separately).
_________________________________________________________________________________________________________

Prior to use (important)

・ Download djayPRO for Mac from the App Store. (paid feature)
https://apps.apple.com/us/app/djay-pro-2/id1302002064?mt=12

・ If you already have djayPRO for Mac installed, update it to the latest version.
・ If your Mac has only a USB Type-C port, you'll need to use a USB Type-C male to USB-A female cable (sold separately).
・ Refer to the Hardware Diagram on the Pioneer DJ support page for functions you can control from the unit.

Precautions
djayPRO for Mac is a DJ software made by Algoriddim GmbH. Refer to the Algoriddim website for the app.
https://www.algoriddim.com/
The URL listed in this guide is as of June 2019 and are subject to change.

System requirements

Supported operating systems: macOS Mojave 10.14, macOS High Sierra 10.13, macOS Sierra 10.12, OS X 10.11 (latest update)
USB port: Your Mac must have a USB 2.0 port to connect with the unit.
Internet connection: You'll need an internet connection for downloading the software and streaming.
For information on the latest system requirements, compatibility and supported operating systems, visit the App Store. https://apps.apple.com/us/app/djay-pro-2/id1302002064?mt=12
_________________________________________________________________________________________________________

Turn the power on.

First, turn on your Mac. Then, turn on the power of all connected devices such as speakers with built-in.
_________________________________________________________________________________________________________

Check the audio device settings

After launching djayPRO for Mac, follow the instructions below to confirm that the unit is recognized as an audio device.

  1. Click [Screenshot_2022-01-04_at_14.15.01.png ] on the top-left corner of the screen and open [Audio Device Setting].

    Screenshot_2022-01-04_at_14.15.14.png

  2. On the Devices screen, check that the settings are as follows.

Screenshot_2022-01-04_at_14.16.00.png

_________________________________________________________________________________________________________

About trademarks and registered trademarks

・ Pioneer DJ is a trademark of PIONEER CORPORATION and is used under license.
・ djay and its logo are trade names or registered trademarks of Algoriddim GmbH.
・ Mac and macOS are trademarks of Apple Inc., registered in the U.S. and other countries.
・ App Store is a service mark of Apple Inc.
Other trademarks and trade names are the property of their respective owners.
© 2019 Pioneer DJ Corporation

Was this article helpful?