Skip to main content

Software Information

CDJ-3000 Serato DJ Pro


To ensure good performance & maximum compatibility, make sure your device is up to date with the latest firmware & drivers:


For all information about Serato DJ Pro, please visit

This section describes the necessary information when you use your CDJ-3000 with Serato DJ Pro.

CDJ-3000 has a computer control mode.
That mode enables the CDJ-3000 to control Serato DJ Pro by connecting your computer with a USB cable.

The internal USB sound card does not work as Serato DJ Pro's audio output device.
You need to use an audio output device that comes with Serato DJ Pro or a mixer that equips an audio output device for Serato DJ Pro.


You can control Serato DJ Pro from the CDJ-3000.

How to setup (Sep, 2021)

  • Operating Instructions (Windows / macOS)
    Connection Guide
    These are instructions regarding the connection and setting of Serato DJ Pro.
  • Serato DJ Pro (Windows / macOS) : ver. 2.5.7
  • Driver software (Windows / macOS)
    It isn't necessary to install the driver software.
    By using the standard driver software installed in OS, CDJ works only by connecting a computer with a USB cable.
  • CDJ-3000 Firmware (Windows / macOS) : ver. 1.20 or later
Was this article helpful?