Skip to main content

Output Issues

Sound is affected by distortion or clipping.

If the volume level is too high, the sound may be affected by distortion or clipping.

Play a track and check the following:

1) Check the channel level indicator

Adjust the level with the TRIM knob so the orange color lights up in the louder parts of the track.

2) Check the MASTER LEVEL indicator

With the channel fader at the top, adjust the level with the MASTER LEVEL knob so the orange color lights up in the louder parts of the track.

3) Turn off KEY LOCK.

If distortion and sound clipping doesn’t improve, the output level may exceed the allowable input level of the connected speaker or amplifier.

In this case, you need to lower the output level with the MASTER attenuator.

For details, refer to "Master Attenuator Level setting" in "Changing the settings" in the Operating Instructions.

If sound skipping, sound cutting, or noise occurs, see the DDJ-1000SRT FAQ > [Troubleshooting > "Sound skips, cuts, or is affected by noise.]


You can read the Operating Instructions [here].

Was this article helpful?