Skip to main content

PC/Mac & DJ Software

DJM-900NXS2 is not recognized when Serato DJ is launched.

Windows computer sound settings

  1. Connect DJM-900NXS2 to your computer and turn it power on.

Go [ControlPanel] - [Hardware and Sound] and click [Sound]DJM-900NXS2_No123_E_1.png

  1. If PIONEER DJM-900NXS2 has been "Default Device", go to 3.DJM-900NXS2_No123_E_2.png
  2. Choose other sound device rather than PIONEER DJM-900NXS2 and click "Set as Default Device". DJM-900NXS2_No123_E_3.png

Close the window by clicking "OK".

  1. Close the control panel and resart your computer.

 

Mac Audio MIDI setting reload

  1. Connect DJM-900NXS2 to your computer and turn it power on.
  2. Open [Applications] folder, [Utilities] folder and [Audio MIDI Setup.app].
  3. Open [Audio Device] window. Confirm that [Audio MIDI Setup] windows pops up.

Click [Window] and choose [Show MIDI Window]. DJM-900NXS2_No123_E_4.png

  1. [MIDI Studi] window opens up, click [PIONEER DJM-900NXS2] icon.

The icon turns to blue color, click [Remove Device].

"PIONEER DJM-900NXS2" icon dissapers and comes back again. DJM-900NXS2_No123_E_5.png

  1. Close [Audio MIDI Setup] and turn DJM-900NXS2 power off.
  2. Turn DJM-900NXS2 power on and run DJ Application.
Was this article helpful?