Turn off the power.

Check that the USB cable is connected to the USB terminal A.

Turn on the power and start the update process again.

For details on the procedure, obtain the update guide from the firmware download page.

This means the firmware update failed. Please update the firmware again. For details, please refer to [the Firmware Update Guide](###IMG_ROOT###DDJ-1000_update_manual_e_2nd.pdf).

This means the firmware update failed. Please update the firmware again.

For details, please refer to [the Firmware Update Guide].

This means the firmware update failed. Turn on the power while holding down [SLIP REVERSE] and [4BEAT LOOP/EXIT] on the left deck. The red at the top of the master level indicator will start blinking and the DDJ-1000 will launch in firmware update mode. Then please start the update again. For details, please refer to [the Firmware Update Guide](###IMG_ROOT###DDJ-1000_update_manual_e_2nd.pdf).

This means the firmware update failed. Turn on the power while holding down [SLIP REVERSE] and [4BEAT LOOP/EXIT] on the left deck. The red at the top of the master level indicator will start blinking and the DDJ-1000 will launch in firmware update mode. Then please start the update again.

For details, please refer to [the Firmware Update Guide].