To ensure good performance & maximum compatibility, make sure your device is up to date with the latest firmware & drivers:

For all information about TRAKTOR PRO 3, please visit www.native-instruments.com.

This section describes necessary information when you use your XDJ-700 with TRAKTOR Series. The XDJ-700 equips a computer control mode.
That mode enables the XDJ-700 to control TRAKTOR Series by connecting your computer with a USB cable.
The XDJ-700 equips an internal USB sound card. So you can use this sound card as an audio output device for TRAKTOR Series.

USING THE XDJ-700 AS A TRAKTOR PRO 3 CONTROLLER

How to setup (March, 2020)

• Operating Instructions (Windows / Mac OS)
  Connection Guide
  This is instructions regarding to connection and setting of TRAKTOR Series software.
• TRAKTOR PRO 3 (Windows / Mac OS)
  TRAKTOR PRO 3 ver. 3.3.0
• Driver software (Windows / Mac OS)
  It isn't necessary to install the driver software. 
  By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.
• XDJ-700 Firmware (Windows / Mac OS)
  ver. 1.13 or later

USING THE XDJ-700 AS TRAKTOR PRO 3 AUDIO OUTPUT DEVICES

Pioneer DJ provides driver software for TRAKTOR Series.
With this file, you can use the XDJ-700's internal audio sound card as an audio output device for TRAKTOR Series.

How to setup (March, 2020)

• Operating Instructions (Windows / Mac OS)
  Connection Guide
  This is instructions regarding to connection and setting of TRAKTOR Series software.
• TRAKTOR PRO 3 (Windows / Mac OS)
  TRAKTOR PRO 3 ver. 3.3.0
• Driver software
  Windows
  ver. 1.500 or later
  
  Mac OS
  It isn't necessary to install the driver software.
  By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.
  
  
• XDJ-700 Firmware (Windows / Mac OS)
  ver.1.13 or later