For all information about TRAKTOR Series, please visit www.native-instruments.com.

This section describes the necessary information when you use your CDJ-900NXS with TRAKTOR Series. The CDJ-900NXS equips a computer control mode.
That mode enables the CDJ-900NXS to control TRAKTOR Series by connecting your computer with a USB cable.
The CDJ-900NXS equips an internal USB sound card. So you can use this sound card as an audio output device for TRAKTOR Series.

USING THE CDJ AS A TRAKTOR PRO 3 CONTROLLER

How to setup (February, 2019)

• Operating Instructions (Windows / Mac OS)
  Connection Guide
  These are the instructions regarding the connection and setting of TRAKTOR Series software.
• TRAKTOR PRO 3 (Windows / Mac OS)
  TRAKTOR PRO 3 Ver.3.0.2
• Driver software (Windows / Mac OS)
  It isn't necessary to install the driver software.
  By using the standard driver software installed in OS, CDJ works only by connecting a computer with a USB cable.
• CDJ-900NXS Firmware (Windows / Mac OS)
• Ver.1.31 or later
  
  

USING THE CDJ AS TRAKTOR PRO 3 AUDIO OUTPUT DEVICES

Pioneer DJ provides driver software for TRAKTOR Series.
With this file, you can use the CDJ-900NXS's internal audio sound card as an audio output device for TRAKTOR Series.

How to setup (February, 2019)

• Operating Instructions (Windows / Mac OS)
  Connection Guide
  These are the instructions regarding the connection and setting of TRAKTOR Series software.
• TRAKTOR PRO 3 (Windows / Mac OS)
  TRAKTOR PRO 3 Ver.3.0.2
• Driver software
  
  Windows
  Ver.1.500 or later
  
  Mac OS
  It isn't necessary to install the driver software. 
  By using the standard driver software installed in OS, CDJ works only by connecting a computer with a USB cable.
  
  
• CDJ-900NXS Firmware (Windows / Mac OS)
  Ver.1.31 or later