TRAKTOR PRO 3

For all information about TRAKTOR PRO 3, please visit www.native-instruments.com.

For all information about TRAKTOR Series, please visit www.native-instruments.com. 
This section describes necessary information when you use your CDJ-2000NXS2 with TRAKTOR Series. The CDJ-2000NXS2 equips a computer control mode.
That mode enables the CDJ-2000NXS2 to control TRAKTOR Series by connecting your computer with a USB cable.
The CDJ-2000NXS2 equips an internal USB sound card. So you can use this sound card as an audio output device for TRAKTOR Series.

Using the CDJ as a TRAKTOR PRO 3 Controller

How to setup (February, 2019)

  • Operating Instructions (Windows / Mac OS)
    Connection Guide
    This is instructions regarding to connection and setting of TRAKTOR Series software.
  • TRAKTOR PRO 3 (Windows / Mac OS)
    TRAKTOR PRO 3 Ver.3.0.2
  • Driver software (Windows / Mac OS)
    t isn't necessary to install the driver software. 
    By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.
  • CDJ-2000NXS2 Firmware (Windows / Mac OS)
    Ver.1.84 or later

Using the CDJ as TRAKTOR PRO 3 Audio Output Devices

Pioneer DJ provides driver software for TRAKTOR Series.
With this file, you can use the CDJ-2000NXS2's internal audio sound card as an audio output device for TRAKTOR Series.

How to setup (February, 2019)

  • Operating Instructions (Windows / Mac OS)
    Connection Guide
    This is instructions regarding to connection and setting of TRAKTOR Series software.
  • TRAKTOR PRO 3 (Windows / Mac OS)
    TRAKTOR PRO 3 Ver.3.0.2
  • Driver software
    Windows
    Ver.1.500 or later

    Mac OS
    It isn't necessary to install the driver software.
    By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.

  • CDJ-2000NXS2 Firmware (Windows / Mac OS)
    Ver.1.84 or later
Was this article useful?