This section describes necessary information when you use your CDJ-2000 with Serato Scratch Live.

The CDJ-2000 is a certified USB controller for Scratch Live from Serato. The CDJ-2000 has a computer control mode. That mode enables the CDJ-2000 to control Scratch Live by connecting your computer with a USB cable.

The internal USB sound card does not work as Scratch Live's audio output device. You need to use an audio output device comes with Scratch Live or a mixer that equips an audio output device for Scratch Live.

USING THE CDJ AS A SCRATCH LIVE CONTROLLER

You can control Scratch Live from the CDJ-2000.

How to setup (December, 2011)

• Operating Instructions (Windows / Mac OS)
  Connection Guide
  This is instructions regarding to connection and setting of Scratch Live.
• Scratch Live (Windows / Mac OS)
  Ver2.1.0
• Driver software (Windows / Mac OS)
  It isn't necessary to install the driver software.
  By using the standard driver software installed in OS, CDJ works only connecting a computer with a USB cable.
• CDJ-2000 Firmware (Windows / Mac OS)
  Ver4.20 or later