The [MIC 1] terminal supports phantom power.

You can connect a condenser microphone to the unit.

Turn the [MIC 1 PHANTOM ON/OFF] button on when you use a condenser microphone.

If the button doesn’t light up when it’s turned on, the phantom power function is

locked. You can unlock it with [MIC PHANTOM LOCK] in the Utility settings.

CAUTION

Do not turn phantom power on except when you have a condenser microphone that

requires phantom power connected to the [MIC 1] terminal.

Turn phantom power off before connecting or disconnecting a microphone to/from the [MIC 1] terminal. If used improperly, the unit may be damaged.

Only turn phantom power on or off when the [MIC] button is turned off or when the MIC [LEVEL 1] knob is set to the minimum. If phantom power is used improperly, the monitor device may generate a large amount of noise, which may cause device failure or even hearing loss.